MSZ series heavy type imbedding scraper conveyor is suitable for the conveying of block and multi-density materials, such as coal feeding to coal mill in power station, coal feeding to circulating fluidized bed boiler and material feeding of cement clinker and manganese ore particles etc. Its speed is low and adjustable, and can control the feed amount by adjusting the height of the material layer. This series of imbedding scraper conveyor has five models, the maximum conveying capacity can reach up to 120t/h. This model is mostly head discharge, if the need for tail discharge must be explained when ordering, its main technical parameters are shown in the table.
MSZ series imbedding scraper conveyor main technical parameters:
Model | MSZ40 | MSZ50 | MSZ63 | MSZ80 | MSZ100 |
Trunk width (mm) | 400 | 500 | 630 | 800 | 1000 |
Load bearing depth | 250 | 400 | 400 | 400 | 400 |
Maximum bearing depth | 100-250 | 100-350 | 100-350 | 100-350 | 100-350 |
Scraper chain | Model and pitch | MG200P=200mm |
Allowable load | 110 |
Weight | 33.5 | 37.7 | 42.5 | 50 | 60 |
Speed | 0.08-0.25 |
Rated capacity | 8-40 | 10-50 | 16-80 | 20-100 | 30-120 |
Maximum transport distance | 40 | 35 | 35 |
Note: The values in the table are calculated according to the following conditions: Material - crushed coal, volume-weight γ=1t/m3.
